Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
- Injection system
   + System of injection of Mono-Motronic
   + System of injection of Digifant
   - System of injection of KE-III-Jetronic
      Basic elements
      Operating procedure
      Lambda regulation
      Malfunctions and independent diagnostics
      Independent repair
      Visual check
      Check of separate elements
      Search of malfunctions
      Removal of components
      Check of a mode of idling and analysis of exhaust gases
      List of malfunctions
   + Systems of injection of MPI and MPFI
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications




датчик перепада давления CROCUS-L D.
запчасти либхерр

Malfunctions and independent diagnostics

The control unit of system of injection can distinguish and write down a part of the malfunctions arising during operation of the engine in memory. Data of the store of malfunctions are read out by means of the special device for reading of V. A. G 1551, and the store can contain records about many malfunctions.

The control unit of system of injection of KE-III-Jetronic is closely connected in operation with the control unit of system of completely electronic ignition. Therefore the store of malfunctions of system of ignition, and the store of system of injection at first is read out then.