Electric regulation of external rear-view mirrors
Both mirrors are regulated by the switch in an armrest of a driver's door. Besides, the surface of mirrors is warmed, if heating of back glass is included. More detailed information on mirrors (with mechanical regulation) you will find body Elements in head.
If at inclusion of adjustment of mirrors they do not move:
|
- At first it is necessary to check a safety lock.
- Then to remove the switch (see above in this chapter) and to check it according to the scheme (also given in this chapter).
- If the switch as it should be, it is necessary to remove a mirror that there were available connections of the regulating engine (head body Elements).
Whether - tension arrives at the included ignition and switch pressing to engine contacts, whether connection on "weight" is serviceable?
- If the answer is positive, malfunction is covered only in the engine. Unfortunately, it cannot be got separately, but only complete with a mirror.
- However it is temporarily possible to adjust a mirror a hand.
- At idle heating of a mirror it is necessary to check according to the corresponding electroscheme a current way from the switch of heating of back glass.
|
|
|