- Faulty safety lock.
- Faulty switch. It should be removed (the way described in this chapter) and to check by means of a control lamp, whether passes on a white wire a current at the included ignition and the pressed switch.
- To remove both coverings of racks near back glass.
- To check conducting to back glass: to check by means of a control bulb, whether a food on a white connecting wire to glass at the left reaches back. (In the same way it is necessary to operate and on the models equipped with the aerial of back glass).
- To check on the right rack, whether as it should be contact on "mass" of a thread of heating flew down.
- If heating threads are damaged and by that the electric chain is broken off, it is possible to use a silver current-carrying varnish. It is made, for example, by Doduco firm, and to get it it is possible in shop of auto parts.
|
|