Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation


Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
- Devices and auxiliary devices
   Check of indicators and signaling devices
   Elements of a combination of devices
   Speedometer
   Tachometer
   Hours
   Indicator of amount of fuel
   The indicator of temperature of cooling liquid
   Voltage stabilizer
   Additional devices
   The top indicators in a combination of devices
   The indicator of cooling liquid
   Indicator of brake system
   Indicator of pressure of oil
   Indicators of indexes of turns
   Bottom indicators
   Indicator of a charge of the storage battery
   Indicator of indexes of turn of the trailer
   Safety cushion indicator
   Indicator of anti-blocking system
   Indicator of a driving beam
   Indicator of the parking brake
   Self-examination system
   Switches
   Ignition lock
   Check of switches
   Buzzer of shutdown of lighting and radio
   Lighter
   Heating of back glass
   Check of screen wipers and stekloomyvatel
   Screen wiper engine
   List of malfunctions
   Screen wiper of back glass
   List of malfunctions
   Replenishment of a tank of a washer of glasses
   System of washing of headlights
   Audiosystem
   Aerial of back glass
   Electric regulation of external rear-view mirrors
   System of locks with the central management
   Electric window regulators
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications



На http://www.доступнаясред𚋿.рф купить вертикальный подъемник для инвалидов.

Audiosystem

Removal

 PERFORMANCE ORDER

  1. To be convinced available a protective number code – for autoradio with the anticreeping coding.
  2. To disconnect the storage battery.
  3. To insert deblocking bracket (sometimes enters into a set with built-in autoradio) in four openings on corners of the forward panel and to pull out autoradio from the central console.
  4. Or to insert four suitable nail or a wire piece into openings and them to deblock fixing springs.
  5. To pull out autoradio forward, if necessary in addition carefully hooking a screw-driver.
  6. To remove wire and aerial sockets.
  7. At installation to watch that the fixing pin of autoradio behind entered into the eye intended for this purpose in the dashboard. For this purpose it is necessary to keep autoradio absolutely horizontally.
  8. A few to press radio into an assembly opening that fixing springs were latched.
  9. To gather a number code at autoradio models with the anticreeping coding according to the maintenance instruction.

 Help: the protective number code will be necessary for entering anew and in case of a detachment of the storage battery, replacement of a safety lock of autoradio or separation of wires of giving of a food for autoradio.

At the left: on an illustration autoradio removal by means of two deblocking brackets (1 and 2) is shown. Deblocking brackets press on fixing springs (3), disconnecting them, thanks to it it is possible to take out radio from an opening for embedding.

On the right: to steal up to two fixing screws (2) forward loudspeakers, it is necessary to remove a covering carefully.

Removal of the loudspeakers located in the dashboard

In Audi 80 at the upper right and at the left in the dashboard there are loudspeakers. The removal and installation description below is provided.

 PERFORMANCE ORDER

  1. Small screw-driver carefully to lift a covering of loudspeaker and to remove it.
  2. The loudspeaker is fixed by means of two screws with a crosswise shliyets.
  3. At installation to press fixing pins in dredging on the dashboard.

Back loudspeakers are located in a covering of doors.

At the left: after a detachment of the loudspeaker attached to a reverse side of a covering of a door (black shooters point to fastening points), there is available a loudspeaker (2). It is also screwed directly on a covering (white shooters show on fixing screws).

On the right: the high-frequency loudspeaker (2) is established separately and fixed by a carving ring (1).

Loudspeakers in a covering of back doors

If back loudspeakers were established at plant, they are in a covering of back doors.

 PERFORMANCE ORDER

  1. To remove a covering of doors.
  2. To disconnect the loudspeaker on a reverse side of a covering.
  3. To weaken three fixing screws of loudspeaker and to disconnect a wire.
  4. High-frequency loudspeakers: to unscrew a carving ring behind on dynamics, to disconnect a wire.