Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
- Lighting
   Lighting check
   Spare lamps
   Replacement of lamps
   Removal of headlights
   Check of adjustment of headlights
   Fog lights
   Independent installation of fog lights
   Indexes of turns
   Back lamps
   Illumination of registration plates
   Other lighting devices
   Dashboard illumination
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications





Indexes of turns

Replacement of lamps

 PERFORMANCE ORDER

  1. Models with 4-and 5-cylinder engines: dexterous hands are one of conditions of success of this work.
  2. To remove a front grille on the left side (at models with the 5-cylinder engine).
  3. Depending on what engine costs on your car, at first it is necessary to disconnect a rubber earring on the right block headlight, to wring out both fixing хомутика back and to extend up an average part of a cap (where it costs, it will be necessary to remove in addition still an air inlet sleeve). To disconnect an external part of a covering (screws with a crosswise shliyets, from above).
  4. If all of you do not reach yet, it is necessary to remove a block headlight.
  5. Models with the 6-cylinder engine: to weaken a bolt with a crosswise shliyets at the block headlight case.
  6. To disconnect a headlight; it is built in a fog light by two fixing ledges.
  7. All models: a few to turn a lamp socle to the left and to extend back.
  8. A few to press the filament lamp into a socle, to turn on the left and to take out.
  9. Installation: to insert a cartridge into the case of the index and to turn to the right against the stop.

Removal of the case of the index of turns

Models with 4-and 5-cylinder engines

 PERFORMANCE ORDER

  1. If necessary to remove a block headlight.
  2. To turn out a cartridge of a lamp.
  3. To compress fixing uvulas of the case of the index in the direction to the boss.
  4. Вытолкнуть case of the index of turns forward.
  5. For installation of the case of the index of turns carefully to insert fixing uvulas into headlights directing on the case and to fix.

Wires (1) for a doosnashcheniye are already laid by fog lights. They are brought (arrow) below to an adjusting opening which becomes available after removal of a forward slip (2).


For separation of the case of the index of turns from the case of a block headlight (1) at models with 4-and the 5-cylinder engine it is necessary to compress fixing uvulas (shooter) in the direction to the boss and to pull out the case from directing on the headlight case (the position 2 shows bottom).


Models with 4-and the 5-cylinder engine:

1–boss of a lamp;
2–lamp case.


Models with the 6-cylinder engine:

1–lamp case;
2–external glass of the index of turn.
The arrow shows on one of fixing ledges by which the case of indexes of turn is established in the case of fog lights.