Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation



Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
- Suspension bracket and steering
   Control of a condition of a casing of the steering mechanism
   Check of dustproof covers and люфта tips of cross-section steering drafts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check люфта steering
   Check of a maple or poliklinovy belt
   Check of level of working liquid
   Check люфта bearing of a nave of a wheel
   Shock-absorbers
   List of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   List of malfunctions
   Repair of a running gear and steering
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering
   Steering repair
   List of malfunctions
   Adjustment of the steering mechanism
   Filling by liquid and pumping of hydrosystem of the amplifier of a wheel
   Safety cushion
   Safety measures requirements
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications





Measurement of adjustment of corners of installation of wheels

Adjustment of corners of installation of wheels is made only after rigid contact with a border, accident (failure), a certain repair work on a forward suspension bracket or it is simple in suspicious cases (unilaterally worn-out tires). This work can be carried out, however, only at the optical measuring stand. For measurement the correct pressure in tires is necessary, the car should be not loaded, самортизирован and is counterbalanced, and components of a forward suspension bracket and a steering should not have люфта. For measurement of adjustment of corners of installation of wheels you will find standard indicators in Specifications.