Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation

Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
- Suspension bracket and steering
   Control of a condition of a casing of the steering mechanism
   Check of dustproof covers and люфта tips of cross-section steering drafts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check люфта steering
   Check of a maple or poliklinovy belt
   Check of level of working liquid
   Check люфта bearing of a nave of a wheel
   List of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   List of malfunctions
   Repair of a running gear and steering
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering repair
   List of malfunctions
   Adjustment of the steering mechanism
   Filling by liquid and pumping of hydrosystem of the amplifier of a wheel
   Safety cushion
   Safety measures requirements
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications

Check люфта steering


  1. To lower the left lateral glass. To put the car on the parking brake, to get the engine.
  2. Give a hand outside through a window and turn a wheel shortly to the left-to the right.
  3. Whether
  4. the left wheel from direct situation immediately how you turned a wheel is turned? Watch a rim because the elastic tire can "swallow" a part of movement.

Reasons люфта steering

Люфт in the steering mechanism it can be caused by the following:

  • Gear lath of the steering mechanism. Arising here люфт, probably, will give in to elimination by adjustment.
  • The broken hinges of cross-section steering drafts or rubber and metal support on the steering mechanism.
  • Defective hinges on the jointed safety steering column.
  • The faulty elastic disk coupling between the steering mechanism and a steering column.