Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation

Audi 80/Avant
+ Technical specification
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
- Suspension bracket and steering
   Control of a condition of a casing of the steering mechanism
   Check of dustproof covers and люфта tips of cross-section steering drafts
   Check of dustproof covers of hinges of a forward suspension bracket
   Check люфта steering
   Check of a maple or poliklinovy belt
   Check of level of working liquid
   Check люфта bearing of a nave of a wheel
   List of malfunctions
   Adjustment of corners of installation of wheels
   Measurement of adjustment of corners of installation of wheels
   List of malfunctions
   Repair of a running gear and steering
   Repair of a forward suspension bracket
   Repair of a back suspension bracket
   Steering repair
   List of malfunctions
   Adjustment of the steering mechanism
   Filling by liquid and pumping of hydrosystem of the amplifier of a wheel
   Safety cushion
   Safety measures requirements
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications

List of malfunctions

Amplifier of the steering mechanism

Its reason
Than to help
A.Slishkom low level of working liquid in a tank 1. The air which has got to hydraulic system left independently
2. Not tight hydraulic system
To add working liquid to «Max» mark
To tighten connections of pipelines; to establish new sealing laying. To remove and загерметизировать (in a workshop) the hydraulic pump and the steering mechanism
Century. Heavy course of the steering mechanism 1. The insufficient pressure created by the pump
2. The steering mechanism is faulty
To check (in a workshop) pressure. If necessary to replace a safety valve of the pump or all pump
To replace (in a workshop)
S.Shumy of the steering mechanism 1. Too low level of working liquid. Liquid contains air vials
2. Not tight boltovy connection of the pump from the entrance party
3. The belt is weakened maple
To give the chance to air to leave, add working liquid
To replace sealing laying, to tighten the union
To pull