- The lamp does not burn at the tightened hand brake: to check a safety lock.
- To remove and check the filament lamp.
- If it did not lead to success, to release the switch behind at the lever of turning on of the parking brake, to disconnect a wire from the switch (behind near the lever) and to bring the tip to the bared metal.
- If the lamp lights up now, means, the switch is faulty.
- The lamp does not die away at the removed parking brake: to disconnect a wire from the switch of the parking brake as it is described above, but to leave the tip to be groundless.
- If the lamp dies away, means, the switch is faulty or established incorrectly.
- If it continues to burn, means, the cable somewhere frayed and there is a short circuit on "weight".
|
|