- To remove a combination of devices, again to connect a wire.
- To include ignition.
- To connect the voltmeter between average and left contact of the stabilizer (if to look at a combination of devices from a reverse side).
- The voltmeter should show 9,75 — 10,25 Century.
- If value of tension leaves out of these limits, means, the voltage stabilizer is faulty. If at all there is no tension, it is necessary to check food giving.
- For this purpose to connect the voltmeter between average and right contact of the stabilizer. If it does not show storage tension, means, it is necessary to look for a gap in conducting.
|
|