|
Screen wiper of back glass
The screen wiper of back glass joins, if you wring out the lever switch of a screen wiper in the dashboard direction. The pump of a stekloomyvatel at the same time turns on, and later certain time water pours out from a nozzle. By short pressing the switch the faltering operating mode joins. For its shutdown it is necessary to press the switch once again. The plug 53 запитывает the screen wiper engine, a current of the plug 53а returns brushes in a starting position.
Removal of the engine of a screen wiper of back glass
|
|
- To remove the screen wiper lever.
- To turn out a nut on an axis of a screen wiper and to remove it together with an insert and sealing laying. To postpone details in sequence of removal.
- To remove a covering of a back door.
- To pull together a hose of a stekloomyvatel from the screen wiper engine.
- To turn off the holder of the engine of a screen wiper of back glass and to remove it together with the engine.
- To separate the multicontact tip.
- To remove the engine from the holder.
- At installation of the new engine let's to it occupy a starting position in the way described for the engine of a forward screen wiper.
- To fasten the screen wiper lever.
- The brush of a screen wiper should be at rest at distance of 40 mm from bottom edge of back glass.
|
|
|