Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation

As it was already told, distributive (or interaxal) the differential is necessary for an equilibration of forces between forward and back bridges. (Differentials of forward and back bridges work irrespective of it).

It is located behind in one block with a transmission.

By the way, the name Torsen occurs from Gleason firm, the producer of transmissions where this differential was invented. This name – reduction from the English words Torque Sensing that means approximately «a feeling torque». Thereby it is as though the action description:

• This differential transfers to the bridge with the best coupling with the road big driving force.
• It occurs in such a manner that one bridge can transfer in 3,5 times big force, than another.
• But at equally good covering (under both bridges) there is a uniform distribution of traction force to the forward and back bridge – any preference to one of leading bridges.

Work principle

The Torsen-differential is based on a principle of a worm gear and uses its basic principles:

• The worm gear can be calculated in such a manner that it will possess high or low factor of blocking.
• The size of factor of blocking depends on an angle of lead of a worm – that is from that, how many is located on a worm of flat or abrupt rounds.
• Example of a flat worm with high factor of blocking is the automobile jack in which the starting handle, influencing on a worm, though raises the car, but the car, despite the weight, never can untwist the starting handle and release a jack.

Device

Thanks to the witty device consisting as a whole of eight worm wheels and 12 gears, in connection with the differential case, hollow shaft, forward and back leading semi-axes the action described in the last section is reached in the best way.