Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation



Audi 80/Avant
- Technical specification
   Engines
   Transmissions
   Body
   Chassis
   15-inch wheels
   Brake system
   Seats
   Passive safety
   Full drive
   Distributive Torsen-differential
   Dynamics of movement at a dry paving
   Instructions on operation for all-wheel drive cars
   Blocking of differential of the back bridge
   Motor compartment
   Regular servicing
   Workplace organization
   Lubricant works
   Consumption of oil
   Right choice of engine oil
   Replacement of engine oil and oil filter
   Check of level of working liquid of the amplifier of a wheel
   Check of level of oil of a mechanical transmission
   Check of level of oil in a drive of the back bridge
   Control of level of ATF in an automatic transmission
   Check of level of oil in the main transfer of an automatic transmission
   ATF replacement
   Greasing of hummock drives, hinges and locks
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications




Check of level of oil in a drive of the back bridge

The reducer of the back bridge of the all-wheel drive Audi 80 model is filled 1,3 l of transmission oil of a class of viscosity of SAE 90 with the qualitative API GL 5 specification. Replacement of oil is not provided, control of oil level however is ordered. The case of a reducer of the back bridge soiled by oil is a disturbing sign. In this case it is necessary to unscrew a control carving stopper to check, whether there is an oil level at level of bottom edge of a bulk opening. Otherwise it is necessary to add oil.