Audi 80/Avant (B4)

since 1991-1995 of release

Repair and car operation



Audi 80/Avant
- Technical specification
   Engines
   Transmissions
   Body
   Chassis
   15-inch wheels
   Brake system
   Seats
   Passive safety
   Full drive
   Distributive Torsen-differential
   Dynamics of movement at a dry paving
   Instructions on operation for all-wheel drive cars
   Blocking of differential of the back bridge
   Motor compartment
   Regular servicing
   Workplace organization
   Lubricant works
   Consumption of oil
   Right choice of engine oil
   Replacement of engine oil and oil filter
   Check of level of working liquid of the amplifier of a wheel
   Check of level of oil of a mechanical transmission
   Check of level of oil in a drive of the back bridge
   Control of level of ATF in an automatic transmission
   Check of level of oil in the main transfer of an automatic transmission
   ATF replacement
   Greasing of hummock drives, hinges and locks
+ Engines
+ System of production of the fulfilled gases
+ cooling System
+ Fuel tank and fuel pump
+ Air filter and airintaking channels
+ injection System
+ Coupling
+ Transmission and transmission
+ Suspension bracket and steering
+ Brake system
+ Anti-blocking system of brakes
+ Wheels and tires
+ Body electrosystem
+ ignition System
+ Lighting
+ Signalling devices
+ Devices and auxiliary devices
+ Heating and ventilation
+ body Elements
+ Search of malfunctions
+ Specifications





Check of level of oil in the main transfer of an automatic transmission

The oil grade is applied to the main transfer of an automatic transmission, excellent that is applied in a mechanical transmission. It should have viscosity of SAE 90 and one from the following specifications:

API GL 5 - MIL - L-2105B

Replacement of oil is not provided, however it is necessary to supervise level of oil,

  • if the case of the main transfer is outside soiled by oil or
  • ATF level in an automatic transmission rose or fell without signs of an external leakage. In this case, probably, "exchange" of lubricant means between planetary transfer and the main transfer as it is described in the previous section took place. Control of level of oil occurs according to the scheme described in the previous section.